packaging industry-Xinxiang Huayang Adhesive Co., Ltd.

　　Technical indicators

Item	Indicators
Appearance	Light yellow particles
Melt viscosity (160 °C)	2500-4000
hardness	70-90
Tensile strength MPa	≥2
Opening hours s	≤16
Curing time s	≤20
Elongation at break%	≥200
Softening point ℃	80-105

　　Application process

　　Glue spraying | Recommended operating temperature is 130 ℃ -170 ℃.

　　Matters needing attention

　　Do not mix with other adhesives.

　　The hot melt adhesive slot must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive.

　　Due to the need for heating during the use of hot melt adhesive, personal protective equipment must be worn.

　　Suggest using the "first in first use" cycle.

　　Packaging and Storage

　　Packaging: 25kg/bag, packaged in a three in one paper plastic bag

　　Storage: Store in a cool and dry place and avoid direct sunlight. The storage temperature should be below 50 ℃ and kept away from fire and heat sources. Unused glue should be immediately sealed and stored.

　　Note: The color of the product may fluctuate due to different batches of raw materials, but it does not affect the performance of the hot melt adhesive.

　　Application companies: Haier, Midea, and AUX.

Model	HY-R115
Uses	This hot melt adhesive is mainly used for bonding EPE foam, polystyrene foam, etc. with plastic and paper products. (Bonding and pasting of EPE foam, polystyrene foam and other materials with plastic and paper products)
Suitable for machinery	Choose a suitable capacity hot melt adhesive machine based on the production speed of the production line.
Product features	Non toxic, odorless, solvent-free, with fast curing speed and strong adhesion.

(HY-R121) Sealed box hot melt adhesive

(HY-R115) Foam hot melt adhesive

(HY-W121) water-based labeling adhesive

(HY-W156) Gold card (packaging) glue