TECHNICAL INDEX
| project | metric |
| surface: | White or pale yellow solid particles |
| softening point: | 100℃±5 |
| Molten viscosity (160℃) | 3000±300mPa.s |
1. Application process
Spray glue, the recommended operating temperature is 140℃ -170℃.
2. matters need attention
Do not mix it with other adhesives.
The hot melt glue groove must be covered tightly to prevent debris from
falling into the properties of the glue.
Because the hot melt adhesive must be heated when used, need should wear
personal protective gear.
"Advanced-use first" recycling is recommended.
3. Packaging and storage
1, packaging: 25kg / bag, three a paper plastic bag packaging;
2, storage: store in a cool and dry place and avoid strong direct light,
the storage temperature should be lower than 50℃ and stay away from the fire
Source and heat source, the unused glue should be immediately sealed for
preservation.
Application enterprises: Wuxi Zhaohui and other filter enterprises.
Packaging and Storage
Packaging: 25kg/bag, woven bag packaging
Storage: Store in a cool, dry place and avoid direct sunlight. The storage temperature should be below 50 ℃ and kept away from sources of fire and heat. Unused glue should be sealed and stored immediately.
Application enterprises: Hualing, Zhongtian, Hengtong, etc.
Related products
(HY-W141) water-based filter element adhesive
(HY-P163) Two-component polyurethane Adhesive
(HY-R140) filter element hot melt adhesive
