adhesive rod-Xinxiang Huayang Adhesive Co., Ltd.

(HY-R170) Hot melt adhesive rod

source

sensitive

customized

precise

Model	HY-R170
Uses	This hot melt adhesive is mainly used for the bonding and fixation of capacitors on electronic and circuit boards (such as the bonding and fixation of capacitors on electronic and circuit boards, as well as the bonding of various accessories, paper products, and other objects).
Suitable for machinery	Hot melt glue guns with different powers.
Product features	It is a white transparent columnar solid with strong adhesion, anti-aging and excellent performance.

Service Hotline：

(86)18603805888

WeChat

TECHNICAL INDEX

　　Technical indicators

Item	Indicators
Appearance	White transparent cylinder
Melt viscosity (160 °C)	3000-50000
hardness	60-90
Tensile strength MPa	≥2
Opening hours s	≤70
Curing time s	≤70
Elongation at break%	≥600
Softening point ℃	75-140
Diameter/length mm	11±1/200-300

　　Application process

　　Glue spraying | The viscosity during gluing can be adjusted according to temperature; If the temperature cannot be adjusted, the gap for gluing time can be adjusted appropriately.

　　Matters needing attention

　　Do not mix with other adhesives.

　　The hot melt adhesive slot must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive.

　　Due to the need for heating during the use of hot melt adhesive, personal protective equipment must be worn.

　　Suggest using the "first in first use" cycle.

　　Packaging and Storage

　　Packaging: 20kg/bag

　　Storage: Store in a cool and dry place and avoid direct sunlight. The storage temperature should be below 40 ℃ and kept away from sources of fire and heat. Unused glue should be immediately sealed and stored.

　　Note: The color of the product may fluctuate due to different batches of raw materials, but it does not affect the performance of the hot melt adhesive.

　　Application companies: Midea, Uni President, and Weilong Group.

note

01. Do not mix with other adhesives

02. The hot melt adhesive groove must be tightly covered to prevent debris from falling in and affecting the performance of the adhesive

03. Due to the need for heating when using hot melt adhesive, personal protective equipment must be worn

04. Suggest using the "first in, first out" cycle

Packaging and Storage

Packaging: 25kg/bag, woven bag packaging
Storage: Store in a cool, dry place and avoid direct sunlight. The storage temperature should be below 50 ℃ and kept away from sources of fire and heat. Unused glue should be sealed and stored immediately.
Application enterprises: Hualing, Zhongtian, Hengtong, etc.