TECHNICAL INDEX
Technical indicators
Item | Indicators |
Appearance | White particles |
Melt viscosity (160 °C) | 1500±200 |
hardness | 40-90 |
Tensile strength MPa | ≥2 |
Curing time s | ＜3 |
Elongation at break% | 200 |
Softening point ℃ | 100±10 |
Application process
Glue spraying | Recommended operating temperature is 160 ℃ -170 ℃.
Matters needing attention
Do not mix with other adhesives.
The hot melt adhesive slot must be tightly covered to prevent debris from
falling into and affecting the performance of the adhesive.
Due to the need for heating during the use of hot melt adhesive, personal
protective equipment must be worn.
Suggest using the "first in first use" cycle.
Packaging and Storage
Packaging: 25kg/bag, packaged in a three in one paper plastic bag
Storage: Store in a cool and dry place and avoid direct sunlight. The
storage temperature should be below 50 ℃ and kept away from sources of fire and
heat. Unused glue should be immediately sealed and stored.
Note: The color of the product may fluctuate due to different
batches of raw materials, but it does not affect the performance of the hot melt
adhesive.
Packaging and Storage
Packaging: 25kg/bag, woven bag packaging
Storage: Store in a cool, dry place and avoid direct sunlight. The storage temperature should be below 50 ℃ and kept away from sources of fire and heat. Unused glue should be sealed and stored immediately.
Application enterprises: Hualing, Zhongtian, Hengtong, etc.
Related products
(HY-R121) Sealed box hot melt adhesive
(HY-R115) Foam hot melt adhesive
(HY-W121) water-based labeling adhesive
(HY-W156) Gold card (packaging) glue
